Views: 0 Author: Site Editor Publish Time: 2026-09-16 Origin: Site
Board space disappears fast once a display, a sensor hub, and a battery share one handheld enclosure. The FPC 0.5 Pitch 2.0H Drawer Vertical SMT Top Contact Half Shield connector answers that squeeze with a 0.5 mm contact pitch and a 2.0 mm stack height, letting engineers pack more signal channels into the same footprint. Its vertical surface-mount body sits flat on the PCB and runs through standard reflow assembly, so the part earns a place in thin, high-density layouts without disrupting the production line. When the enclosure tightens, the half-shielded variant keeps EMI in check at the contact zone without adding bulk.
The drawer actuator secures the flexible circuit through a sliding lock rather than a hinged lid. That mechanism spreads insertion and retention forces along the cable, which lowers the risk of looseness from shock, vibration, or accidental pull. Top-contact placement puts the mating surface on the upper side, a practical fit for stacked-module boards where the cable enters from above. Because the part is built for automated pick-and-place, it slots into existing SMT workflows without special tooling.
This FPC 0.5 Pitch Connector is rated for 50 V AC/DC at 0.5 A per contact, with a maximum initial contact resistance of 40 mΩ and a dielectric withstand of 200 VAC. An operating range of -25°C to +85°C covers most indoor and light-industrial environments, so one part can serve consumer, medical, and control applications. Engineers commonly specify 0.5 mm-pitch FPC connectors for LCD modules, touch panels, wearables, and industrial control boards, where every millimeter of board area is contested. Those numbers reflect the component's rated specification rather than a marketing claim, giving design teams a predictable baseline during validation.
Reach out with your pin count, cable thickness, and board-height requirements, and our engineering team can confirm footprint compatibility and sample availability. Telling us the target application helps us recommend the right position count and cable specification up front.
