 |
32、6098-5271
| Pitch：2.20mm | |
| Pins：8P |
| Insulator Material：PBT（white） |
tape and reel、 tube packaging、Tape and Reel Package
Note For Wafer Connectors, FPC Connectors, FAKRA Connectors, and HSD Connectors, please contact customer service to confirm the final packaging method based on product specifications, size, and quantity requirements.
![[6098-5271] 2.2Pitch 8P Female Housing - Quality Wire-to-Board Connector](http://iororwxhimpllk5p-static.micyjz.com/cloud/pmBpkKlmliSRqlkrpmjmkp/32.jpg "2.2Pitch 8P Female Housing - Quality Wire-to-Board Connector")
The 2.2mm Pitch 8P Female Housing enters a harness workflow at the exact point where loose conductors have to become one plug. On the bench, a prepared wire and its crimp contact slide into a cavity that guides the contact home and holds it there, so the operator knows the position is filled without checking a drawing. Cavities sit in a fixed order, which keeps lead assignment consistent from the first piece to the last and lets a second operator verify the assembly at a glance. Because the shell is keyed to its mate, a partly turned or wrong plug will not seat, so cross-connecting two neighboring harnesses of similar shape is stopped before the mistake travels down the line. The molded body tolerates the flexing and repeated handling that harnesses meet during bundling, taping, and packing, and it holds its dimensions so contacts stay aligned through storage and transport. Once installed, that same construction makes field service straightforward: the plug releases as a unit, leaving the terminal crimps intact, so a technician can swap a component without cutting into the loom. White molding keeps the part readable under bench lighting and helps sort it from other shells in a bin. Those traits add up to fewer reworked leads, quicker inspection, and a harness that comes apart and goes back together the way it was built.
A harness builder fitting the 2.2mm Pitch 8P Female Housing usually works where a short, tidy loom has to come apart for service without turning into a tangle of loose leads. Picture a light electric vehicle pack going together: cell sense leads, a temperature probe, and a charge-port feed all leave the battery enclosure through one plug, so the pack can be dropped out of the frame as a single unit when a service call comes in. On a commercial refrigeration controller, the same shell gathers thermostat, defrost, and fan leads behind the panel, keeping an iced-up cabinet repairable without disturbing the rest of the wiring. Outdoor power equipment is the harder test, where the housing rides on a mower deck or a trimmer body through repeated starts, dust, and wet grass, and the operator still expects the plug to separate cleanly at the end of the season. In each setting the value is the same: eight leads leave as one assembly that a technician can pull, inspect, and refit by hand, and a harness shop can build it in volume with ordinary crimping tools.
1. The 2.2mm Pitch 8P Female Housing is molded in PBT, a material chosen for dimensional stability through repeated handling and mating.
2. Eight circuits land in one wire-side body, so a harness stays a single serviceable plug rather than a fan of small connectors.
3. Keyed mating and a fixed cavity order help keep miswired leads from reaching a finished appliance, vehicle, or instrument.
4. The design suits manual harness assembly, keeping build labor predictable and avoiding proprietary application tooling.
5. Standard 2.2mm pitch practice means it mates with the matching male counterpart and fits harness layouts that already exist.
Q: What does the 2.2mm Pitch 8P Female Housing mate with?
A: It is the wire-side half of a 2.2mm pitch pair: it takes a crimp terminal in each of its eight cavities and mates with the matching male housing or board header for that pitch. Confirm position count, row layout, and keying against the mating part before you release the harness.
Q: How do I load terminals into this 8P female housing?
A: Crimp the contacts onto prepared leads first, then push each one in from the wire side until it seats. Cavity order is fixed, so work from a wiring diagram rather than by eye, and give every lead a light tug to confirm it is held before the plug goes onto the mating half.
Q: How should this wire-side housing be handled and serviced?
A: Keep the shell away from direct solder heat and from solvents that attack thermoplastics, and store loose parts so stacked weight does not deform the cavities. In service, release the plug as a unit instead of pulling individual leads, which keeps the crimps and cavity walls intact for the next mate.
Q: Why does this connector housing use PBT in white?
A: PBT gives the shell the stiffness and dimensional stability a housing needs to hold contact position across repeated mating, while the white molding makes it easier to identify and inspect inside a harness bundle. Both the material and the color are stated on the part specification, so check them against your internal material list before approval.
